Contact: Ms. Du
Hand machine: 18018107016
Telephone: 0512-50332040
The true: 0512-50312036
Web site: www.hqairfilter.cn
Address: No. 199 Chensong Road, Yushan Town, Kunshan City, Suzhou City, Jiangsu Province
Product Features:
Metal frame, keel support, stable structure
Suitable for high humidity air environment
It can be cleaned and reused to save cost
Filter material from the table to the inside, from thin to dense production process molding
High amount of dust
Product efficiency:
Efficiency level: G3, G4, M5 (EN779)
Product Application:
The primary effect skeleton plate filter is widely used in the primary effect filter section of industrial and commercial, civil and other ventilation systems because of its stable structure, easy installation, reusable, high dust capacity and other characteristics
Installation method:
Wind direction: the direction indicated by the arrow on the product label
Direction: The height border of the product is perpendicular to the ground, that is, the filter is perpendicular to the ground. Under special circumstances, the height and width can be switched, and can also be installed horizontally.
Product material and operating conditions:
| frame | Aluminum alloy/galvanized iron/stainless steel |
| Filter material | Polyester fibre |
| The filter material supports the skeleton | Galvanized iron/stainless steel |
| Maximum service temperature | 90℃ |
| Maximum working humidity | 100%RH |
Product selection and naming rules:
Corresponding curve of resistance and air volume:
The performance parameters
| Nominal size(inch) | Actual size(mm) | Surface wind velocity | Initial resistance(Pa) | ||
| WXHXD | WXHXD | m/s | G3 | G4 | M5 |
| 12×24×2 | 287×592×46 | 2.5 | 80 | 90 | 120 |
| 20×24×2 | 490×592×46 | 2.5 | 80 | 90 | 120 |
| 24×24×2 | 592×592×46 | 2.5 | 80 | 90 | 120 |
| 12×24×4 | 287×592×96 | 2.5 | 60 | 75 | 100 |
| 20×24×4 | 490×592×96 | 2.5 | 60 | 75 | 100 |
| 24×24×4 | 592×592×96 | 2.5 | 60 | 75 | 100 |
| Note: 1, the initial effect filter recommended final resistance 250Pa; 2, resistance tolerance is ±10%; 3, special size please contact sales personnel | |||||
